Our newest challenge will be an external water tank that will be tucked under the swim platform. It will contain ballast chambers for moment corrections in the future. This project has been the result of a very involved process to relocate weight as far aft as possible to improve prior bow rolling the boat experience now that it is has retired as a work boat. This is the same vessel as the Gyro install to better understand the project. This ideally would go in the aft compartment with the gyro and the generator but there just isn't and room.
I would be happy to answer any questions that you have. Thanks for looking!
I would be happy to answer any questions that you have. Thanks for looking!
Tank was fully designed using Rhino 5.
| 
|
Material is 7ga. 304 stainless steel with 2b finish.
Rhino model was broken down into individual panels and laser cut.
Rhino model was broken down into individual panels and laser cut.
RSS Feed
